DC hobby motor, 130 size
A small fast motor that spins things like fans and propellers. It needs a driver board.
Brushed 130-size motor rated 6 V (4.5-9 V). About 9100 rpm no-load at 70 mA, 4500 rpm under load at 250 mA, 500 mA stall. 27.5 x 20 x 15 mm body, 2 mm shaft.
Electrical
- Supply voltage
- 4.5 to 9 V
- Current
- 250 mA typical, 500 mA max
Needs alongside it
- Use a motor driver (DRV8833, TB6612FNG, L298N) or a MOSFET; a GPIO can't supply the current.
- Power from a battery or supply rated for 0.5 A, not the board's 5 V pin. Join the grounds.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| M+ | not connected | ||
| M- | not connected |
Size and material
- Size
- 20 × 28 × 15 mm
- Weight
- 17.5 g
- Material
- metal
- Sold by the
- piece
Projects using it
No public project uses it yet. Design one that does.