Skip to content

Micro metal gearmotor 10:1 HPCB 6V (Pololu)

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A tiny, tough geared motor for small robots, wheels and mechanisms that need real torque.

Pololu micro metal gearmotor with long-life carbon brushes. 10:1 gearbox: 3300 rpm no-load and 0.17 kg·cm stall torque at 6 V; 0.15 A no-load, 1.5 A stall. 10 x 12 x 25 mm, 3 mm D-shaft, 9.5 g. Mounts with Pololu micro metal gearmotor brackets.

Electrical

Supply voltage
3 to 9 V
Current
150 mA typical, 1500 mA max

Needs alongside it

  • Use a motor driver (DRV8833, TB6612FNG, MAX14870) or a MOSFET; a GPIO can't supply the current.
  • Power from a supply rated for 1.5 A per motor, not the board's 5 V pin. Join the grounds.

Pins

PinCan doMax VMax mA
M1not connectedMotor terminal.
M2not connectedMotor terminal. Swap with M1 to reverse.

Size and material

Size
10 × 12 × 25 mm
Weight
9.5 g
Material
metal
Sold by the
piece

Projects using it

No public project uses it yet. Design one that does.