Micro metal gearmotor 50:1 HPCB 6V (Pololu)
A tiny, tough geared motor for small robots, wheels and mechanisms that need real torque.
Pololu micro metal gearmotor with long-life carbon brushes. 50:1 gearbox: 650 rpm no-load and 0.74 kg·cm stall torque at 6 V; 0.15 A no-load, 1.5 A stall. 10 x 12 x 25 mm, 3 mm D-shaft, 9.5 g. Mounts with Pololu micro metal gearmotor brackets.
Electrical
- Supply voltage
- 3 to 9 V
- Current
- 150 mA typical, 1500 mA max
Needs alongside it
- Use a motor driver (DRV8833, TB6612FNG, MAX14870) or a MOSFET; a GPIO can't supply the current.
- Power from a supply rated for 1.5 A per motor, not the board's 5 V pin. Join the grounds.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| M1 | not connectedMotor terminal. | ||
| M2 | not connectedMotor terminal. Swap with M1 to reverse. |
Size and material
- Size
- 10 × 12 × 25 mm
- Weight
- 9.5 g
- Material
- metal
- Sold by the
- piece
Projects using it
No public project uses it yet. Design one that does.