Skip to content

12 V diaphragm water pump, 4.5 L/min, self-priming

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A strong 12 V pump for sprayers, water transfer and irrigation, even above the tank.

Sealed self-priming diaphragm pump: 4.5 L/min (1.2 GPM), cuts off at about 80 PSI via its pressure switch, 2 m suction lift, 3/8" hose barbs, rubber mounts. 12 V DC only (over 14 V burns the motor); max 6 h continuous. 165 x 102 x 56 mm, 590 g.

Electrical

Supply voltage
12 to 14 V

Needs alongside it

  • Switch it with a logic-level MOSFET (IRLZ44N) or a relay module.
  • Power from a supply rated for 12 V at a few amps, not the board's 5 V pin. Join the grounds.

Pins

PinCan doMax VMax mA
+not connectedRed lead.
-not connectedBlack lead.

Size and material

Size
165 × 56 × 102 mm
Weight
590 g
Material
plastic
Sold by the
piece

Projects using it

No public project uses it yet. Design one that does.