Skip to content

Push-pull solenoid, 12 V, 10 mm throw

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A strong coil that pushes or pulls a rod, for latches, strikers and kickers.

Large linear solenoid with spring return: 10 mm throw, 6 N starting force at 12 V and 50 % duty, about 12 Ω coil (about 1 A at 12 V). 40 mm long body, 144 g. Keep on-time short: it heats up at 100 % duty.

Electrical

Supply voltage
9 to 12 V
Current
1000 mA typical, 1000 mA max

Needs alongside it

  • Switch it with a logic-level MOSFET rated for 2 A+.
  • Put a 1N4007 across the coil (stripe to +) when switching it with a transistor or MOSFET.
  • Power from a supply rated for 12 V 1.5 A, not the board's 5 V pin. Join the grounds.

Pins

PinCan doMax VMax mA
+not connectedRed lead.
-not connectedBlack lead.

Projects using it

No public project uses it yet. Design one that does.