Push-pull solenoid, 12 V, 5.5 mm throw
A coil that snaps a small rod in or out when powered, like a robotic finger.
Small linear solenoid with a captive spring-return plunger that pushes or pulls 5.5 mm: 0.5 N starting force, 5 N holding, 40 Ω coil (about 300 mA at 12 V). 30 mm long body, 39 g. Good for strikers, latches and button pushers.
Electrical
- Supply voltage
- 6 to 12 V
- Current
- 300 mA typical, 300 mA max
Needs alongside it
- Switch it with a logic-level MOSFET (IRLZ44N) or a relay module.
- Put a 1N4007 across the coil (stripe to +) when switching it with a transistor or MOSFET.
- Power from a supply rated for 12 V 0.5 A, not the board's 5 V pin. Join the grounds.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| + | not connectedRed lead. | ||
| - | not connectedBlack lead. |
Projects using it
No public project uses it yet. Design one that does.