NEMA 14 stepper 35 x 36 mm, 1 A (Pololu)
A smaller precise motor for compact sliders, dials and pan-tilt heads.
Compact bipolar 200 step/rev stepper, 1 A and 2.7 V per coil (2.7 Ω, 4.3 mH), 1.4 kg·cm holding torque. 35 mm square x 36 mm, 5 mm D-shaft, 180 g, 30 cm leads. M3 holes on a 26 mm square.
Electrical
- Supply voltage
- 2.7 V
- Current
- 1000 mA typical, 1000 mA max
Needs alongside it
- Needs a bipolar stepper driver: A4988, DRV8825 or DRV8834 with the current limit set to 1 A.
- Power from a supply rated for 12 V, about 1.5 A per motor, not the board's 5 V pin. Join the grounds.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| A1 | not connectedCoil A. | ||
| A2 | not connectedCoil A. | ||
| B1 | not connectedCoil B. | ||
| B2 | not connectedCoil B. |
Size and material
- Size
- 35 × 36 × 35 mm
- Weight
- 180 g
- Material
- metal
- Sold by the
- piece
Projects using it
No public project uses it yet. Design one that does.