Skip to content

NEMA 17 stepper motor, 200 steps, 12 V 350 mA

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A precise motor for sliders, turntables and anything that must move to an exact position.

Bipolar 4-wire stepper, 1.8° per step, 2 kg·cm (20 N·cm) holding torque, 35 Ω per coil. Rated 12 V at 350 mA. 42 mm square body, 5 mm D-shaft, M3 holes on a 31 mm square. Coil 1: red + yellow, coil 2: green + brown/grey.

Electrical

Supply voltage
5 to 12 V
Current
350 mA typical, 350 mA max

Needs alongside it

  • Needs a stepper driver such as the A4988 (or TB6612/DRV8833 at this current).
  • Power from a battery or supply rated for 12 V, not the board's 5 V pin. Join the grounds.

Pins

PinCan doMax VMax mA
1Anot connectedCoil 1 (red).
1Bnot connectedCoil 1 (yellow).
2Anot connectedCoil 2 (green).
2Bnot connectedCoil 2 (brown or grey).

Size and material

Size
42 × 42 × 34 mm
Material
metal
Sold by the
piece

Projects using it

No public project uses it yet. Design one that does.