Skip to content

NEMA 17 stepper 42 x 38 mm, 1.68 A, 3.7 kg·cm (Pololu)

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A strong precise motor for sliders, camera rigs, turntables and CNC-style machines.

Bipolar 200 step/rev (1.8°) stepper, 1.68 A and 2.8 V per coil (1.65 Ω, 3.2 mH), 3.7 kg·cm holding torque. 42.3 mm square x 38 mm, 5 mm D-shaft, 285 g, 30 cm leads. Standard NEMA 17 M3 holes on a 31 mm square. Run it from 12-24 V through a current-limiting driver.

Electrical

Supply voltage
2.8 V
Current
1680 mA typical, 1680 mA max

Needs alongside it

  • Needs a bipolar stepper driver: DRV8825 or A4988 with heatsink, current limit set to 1.68 A.
  • Power from a supply rated for 12-24 V, about 2 A per motor, not the board's 5 V pin. Join the grounds.

Pins

PinCan doMax VMax mA
A1not connectedCoil A.
A2not connectedCoil A.
B1not connectedCoil B.
B2not connectedCoil B.

Size and material

Size
42 × 38 × 42 mm
Weight
285 g
Material
metal
Sold by the
piece

Projects using it

No public project uses it yet. Design one that does.