Skip to content

NEMA 23 stepper 57 x 56 mm, 2.8 A, 13 kg·cm (Pololu)

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A big, powerful precise motor for CNC machines, heavy sliders and lifts.

Large bipolar 200 step/rev stepper, 2.8 A and 2.5 V per coil (0.9 Ω, 2.5 mH), 13 kg·cm holding torque. 56.4 mm square x 56 mm, 6.35 mm (1/4") D-shaft, 700 g. Too much current for A4988/DRV8825 carriers: use a 3 A+ driver.

Electrical

Supply voltage
2.5 V
Current
2800 mA typical, 2800 mA max

Needs alongside it

  • Needs a bipolar stepper driver: one rated for 2.8 A per coil or more (Pololu 36v4, TB6600 or DM542 class).
  • Power from a supply rated for 24-48 V, 3 A or more per motor, not the board's 5 V pin. Join the grounds.

Pins

PinCan doMax VMax mA
A1not connectedCoil A.
A2not connectedCoil A.
B1not connectedCoil B.
B2not connectedCoil B.

Size and material

Size
56 × 56 × 56 mm
Weight
700 g
Material
metal
Sold by the
piece

Projects using it

No public project uses it yet. Design one that does.