NEMA 8 mini stepper 20 x 33 mm, 0.6 A
A very small precise motor for compact gadgets and tiny CNC builds.
Tiny bipolar 200 step/rev stepper, 0.6 A at 3.9 V per coil (about 7 Ω), 0.2 kg·cm holding torque. 20 mm square x 33 mm body, 4 mm round shaft about 9 mm long, Molex PicoBlade 6-pin connector (4 wires used). M2 holes on the standard 16 mm NEMA 8 square.
Electrical
- Supply voltage
- 3.9 V
- Current
- 600 mA typical, 600 mA max
Needs alongside it
- Needs a bipolar stepper driver: DRV8833, TB6612FNG or DRV8834 at 0.6 A.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| A1 | not connectedCoil A. | ||
| A2 | not connectedCoil A. | ||
| B1 | not connectedCoil B. | ||
| B2 | not connectedCoil B. |
Size and material
- Size
- 20 × 33 × 20 mm
- Material
- metal
- Sold by the
- piece
Projects using it
No public project uses it yet. Design one that does.