Skip to content

Brass liquid solenoid valve, 12 V, 1/2" BSP

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A heavy-duty electric tap for water lines, tanks and pools, even without water pressure.

Normally closed brass valve with 1/2" BSP (G) threads, rated 0-1.0 MPa (140 psi) and -5 to 80 °C, so it works from zero pressure (gravity feed), unlike the plastic valve. 12 V at 3 A (opens down to 6 V at 1.6 A). 105 x 55 x 65 mm, 770 g. Rated for 50 million cycles.

Electrical

Supply voltage
6 to 12 V
Current
3000 mA typical, 3000 mA max

Needs alongside it

  • Switch it with a relay module or a MOSFET rated for 3 A+.
  • Put a 1N4007 across the coil (stripe to +) when switching it with a transistor or MOSFET.
  • Power from a supply rated for 12 V 3 A, not the board's 5 V pin. Join the grounds.

Pins

PinCan doMax VMax mA
+not connectedRed lead.
-not connectedBlack lead.

Size and material

Size
65 × 105 × 55 mm
Weight
770 g
Material
metal
Sold by the
piece

Projects using it

No public project uses it yet. Design one that does.