Skip to content

Arduino Nano

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A tiny Arduino that plugs straight into a breadboard. Same code as the Uno, smaller footprint.

Breadboard-sized ATmega328P board, 5 V logic. Same chip as the Uno plus two analog-only inputs (A6, A7). Mini-B USB, or 7-12 V on VIN.

Electrical

Supply voltage
5 to 12 V
Logic level
5 V
Current
20 mA typical, 500 mA max
Talks over
digital, analog, pwm, i2c, spi, uart
Board
avr, 5 V logic, 200 mA total GPIO

Pins

PinCan doMax VMax mA
D0digital, serial RXUSB serial RX. Using it can break uploads. 40 mA absolute max per pin.5.520
D1digital, serial TXUSB serial TX. Using it can break uploads.5.520
D2digital, interruptExternal interrupt INT0.5.520
D3digital, PWM, interruptPWM, external interrupt INT1.5.520
D4digital5.520
D5digital, PWM5.520
D6digital, PWM5.520
D7digital5.520
D8digital5.520
D9digital, PWM5.520
D10digital, PWM, SPI select5.520
D11digital, PWM, SPI MOSI5.520
D12digital, SPI MISO5.520
D13digital, SPI clockOn-board LED.5.520
A0analog, digital5.520
A1analog, digital5.520
A2analog, digital5.520
A3analog, digital5.520
A4analog, digital, I2C dataAlso the I2C SDA line.5.520
A5analog, digital, I2C clockAlso the I2C SCL line.5.520
A6analog, input onlyAnalog input only. Cannot be used as a digital pin.5.5
A7analog, input onlyAnalog input only. Cannot be used as a digital pin.5.5
5V5 V500
3V33.3 VFrom the USB chip. 50 mA max.50
VINpower in7-12 V input.
GNDground
GND2ground
AREFnot connectedAnalog reference input.
RESETnot connectedPull LOW to reset the board.

Size and material

Size
18 × 8 × 45 mm
Weight
7 g
Material
pcb
Sold by the
piece

Projects using it