I2S MEMS microphone (ICS-43434)
A small digital microphone so the project can listen.
Low-noise digital MEMS mic breakout with I2S output, for voice, keyword spotting and sound level on ESP32, Pico and Raspberry Pi. Bottom-ported: the hole faces the sound. 1.6-3.6 V only.
Electrical
- Supply voltage
- 1.6 to 3.6 V
- Talks over
- digital
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 3V | 3.3 V3.3 V only. | ||
| GND | ground | ||
| BCLK | digital | ||
| DOUT | digital | ||
| LRCLK | digitalWord select. | ||
| SEL | digitalChannel: GND = left, 3V = right. |
Works with
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.