I2S MEMS microphone (SPH0645LM4H)
A small digital microphone that lets a board listen for sounds and words.
Digital MEMS mic breakout with I2S output (no ADC needed), for voice detection and sound levels on ESP32, Pico and Pi. Bottom-ported: the hole on the underside faces the sound. 1.6-3.6 V only.
Electrical
- Supply voltage
- 1.6 to 3.6 V
- Current
- 0.6 mA typical, 0.6 mA max
- Talks over
- digital
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 3V | 3.3 V3.3 V only. Never 5 V. | ||
| GND | ground | ||
| BCLK | digitalI2S bit clock. | ||
| DOUT | digitalI2S data out. | ||
| LRCL | digitalI2S word select. | ||
| SEL | digitalChannel select: GND = left, 3V = right. |
Size and material
- Size
- 17 × 2 × 13 mm
- Weight
- 0.4 g
- Material
- pcb
- Sold by the
- piece
Works with
Projects using it
No public project uses it yet. Design one that does.