MAX98357A I2S class-D amplifier, 3 W
Turns sound from the board into enough power to drive a speaker.
Digital audio in (I2S), speaker out: 3.2 W into 4 Ω at 5 V. No DAC needed on the board. Gain 3-15 dB set by the GAIN pin (9 dB default); SD pin selects left, right or mixed. 2.5-5.5 V. Outputs are bridge-tied: never connect them to ground.
Electrical
- Supply voltage
- 2.5 to 5.5 V
- Current
- 2.4 mA typical, 650 mA max
- Talks over
- digital
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| Vin | 3.3 V, 5 V5 V gives full power. | ||
| GND | ground | ||
| LRC | digitalI2S word select (LRCLK / WS). | ||
| BCLK | digitalI2S bit clock. | ||
| DIN | digitalI2S data. | ||
| GAIN | not connectedLeave open for 9 dB; tie to GND for 12 dB, Vin for 6 dB. | ||
| SD | digitalShutdown / channel select. Leave open for (L+R)/2. | ||
| SPK+ | not connectedSpeaker +. | ||
| SPK- | not connectedSpeaker -. Not ground. |
Size and material
- Size
- 19 × 3 × 18 mm
- Weight
- 1.2 g
- Material
- pcb
- Sold by the
- piece
Works with
Projects using it
No public project uses it yet. Design one that does.