Skip to content

WS2812B addressable RGB LED strip, 60 LEDs/m

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A strip of lights where every single light can be any color, for glowing signs and animations.

Individually addressable 5 V strip, 60 LEDs per metre, cuttable every LED. One data wire drives the whole chain. Up to 60 mA per LED at full white (3.6 A per metre), about 1 A per metre for typical animations. Data needs 0.7 x VDD (3.5 V at 5 V).

Electrical

Supply voltage
4.5 to 5.5 V
Current
1000 mA typical, 3600 mA max
Talks over
digital

Needs alongside it

  • Power from a 5 V supply sized at about 1 A per metre (3.6 A at full white), not the board's 5 V pin. Add 1000 µF across 5V/GND.
  • 3.3 V data is below spec at 5 V. Use a 74AHCT125 on DIN for reliable runs from an ESP32 or Pi.

Pins

PinCan doMax VMax mA
5V5 VFeed power at both ends for runs over about 1 m.
DINdigitalData in, through a 330 Ω resistor. Arrow on the strip points away from here.
GNDgroundShare ground with the board.

Size and material

Size
1 × 0 × 0 m
Material
led
Sold by the
m

Works with

Projects using it

No public project uses it yet. Design one that does.