A4988 stepper motor driver
Drives a stepper motor smoothly: the board just says how many steps and which way.
Pololu-format bipolar stepper driver: STEP/DIR control, up to 1/16 microstepping, adjustable current limit (trimmer). Motor supply VMOT 8-35 V, logic VDD 3-5.5 V. About 1 A per coil without a heatsink, 2 A with cooling. Needs a 100 µF capacitor across VMOT.
Electrical
- Supply voltage
- 3 to 35 V
- Talks over
- digital
Needs alongside it
- VMOT needs an 8-35 V supply sized for the motor. Set the current limit before connecting the motor.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VMOT | power inMotor supply, 8-35 V. 100 µF across VMOT/GND. | ||
| GND | groundMotor ground. | ||
| 2B | not connected | ||
| 2A | not connected | ||
| 1A | not connected | ||
| 1B | not connected | ||
| VDD | 3.3 V, 5 VLogic supply, 3-5.5 V. | ||
| GND2 | groundLogic ground. | ||
| STEP | digitalOne pulse = one (micro)step. | ||
| DIR | digital | ||
| ENABLE | digitalLOW = enabled (default). | ||
| SLEEP | digitalTie to RESET to keep awake. | ||
| RESET | digital | ||
| MS1 | digitalMicrostep select. | ||
| MS2 | digital | ||
| MS3 | digital |
Size and material
- Size
- 15 × 3 × 20 mm
- Weight
- 1.3 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.