PAM8302 mono class-D amplifier, 2.5 W
A small amplifier that makes a board's sound loud enough for a speaker.
Tiny analog-input mono amp: 2.5 W into 4 Ω (1.5 W into 8 Ω) at 5.5 V, differential input (A+/A-), shutdown pin, volume trimmer, screw terminal for the speaker. 2-5.5 V; 4 mA quiescent. Outputs are bridge-tied: never ground them.
Electrical
- Supply voltage
- 2 to 5.5 V
- Current
- 4 mA typical, 600 mA max
- Talks over
- analog
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V | ||
| GND | ground | ||
| A+ | analogAudio in +, from a DAC or PWM pin through a filter. | ||
| A- | groundAudio in -, to ground for single-ended audio. | ||
| SD | digitalPull LOW to shut down. | ||
| + | not connectedSpeaker +. | ||
| - | not connectedSpeaker -. Not ground. |
Size and material
- Size
- 15 × 2 × 24 mm
- Weight
- 1.4 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.