Anemometer wind speed sensor (analog 0.4-2 V)
Measures wind speed, for weather stations and automatic awnings.
Three-cup outdoor anemometer: 0.4 V at 0 m/s to 2.0 V at 32.4 m/s (0.5-50 m/s test range). Powered from 7-24 V (black ground, brown power, blue signal). 105 mm tall, arms 70 mm, 111.8 g.
Electrical
- Supply voltage
- 7 to 24 V
- Talks over
- analog
Needs alongside it
- Needs 7-24 V (e.g. a 9 V or 12 V supply), more than a board pin gives.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| V+ | power inBrown wire, 7-24 V. | ||
| GND | groundBlack wire. | ||
| OUT | analogBlue wire, 0.4-2.0 V. |
Size and material
- Size
- 204 × 105 × 204 mm
- Weight
- 111.8 g
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.