Audio FX Mini sound board, 2 MB (WAV/OGG trigger)
Plays sound effects at the press of a button, without any code.
Stand-alone sound player: copy WAV/OGG files over USB, then connect a button to a trigger pin and it plays, no programming. Also controllable over UART. Line/headphone output (add an amp for speakers). 3-5.5 V.
Electrical
- Supply voltage
- 3 to 5.5 V
- Talks over
- uart, digital
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| Vin | 3.3 V, 5 V | ||
| GND | ground | ||
| TX | serial TXSerial out (UART mode). | ||
| RX | serial RXSerial in (UART mode). | ||
| UG | not connectedTie to GND at power-up for UART mode. | ||
| Rst | digital | ||
| Act | digitalLOW while a sound is playing. | ||
| T0 | digitalTrigger: pull to GND to play T0x files. | ||
| T1 | digitalTrigger: pull to GND to play T0x files. | ||
| T2 | digitalTrigger: pull to GND to play T0x files. | ||
| T3 | digitalTrigger: pull to GND to play T0x files. | ||
| T4 | digitalTrigger: pull to GND to play T0x files. | ||
| T5 | digitalTrigger: pull to GND to play T0x files. | ||
| T6 | digitalTrigger: pull to GND to play T0x files. | ||
| T7 | digitalTrigger: pull to GND to play T0x files. | ||
| T8 | digitalTrigger: pull to GND to play T0x files. | ||
| T9 | digitalTrigger: pull to GND to play T0x files. | ||
| T10 | digitalTrigger: pull to GND to play T0x files. |
Size and material
- Size
- 38 × 4 × 23 mm
- Weight
- 3.6 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.