Bluefruit LE UART Friend (Bluetooth LE serial)
Lets a phone app talk to the project over Bluetooth, like a wireless cable.
Nordic nRF51822 Bluetooth LE module with Adafruit firmware: appears as a wireless serial port (Nordic UART) to a phone app, or as a keyboard/beacon via AT commands. UART at 9600 baud with CTS/RTS flow control. 3.3 V regulator; RXI is level-shifted for 3-5 V logic, TXO is 3.3 V.
Electrical
- Supply voltage
- 3.3 to 5.5 V
- Talks over
- uart
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| MOD | digitalMode: LOW = data mode, HIGH = command mode. | ||
| CTS | digitalClear to send, into the module. Tie LOW if unused. | ||
| TXO | serial TXData out (3.3 V). To the board's RX. | ||
| RXI | serial RXData in (3-5 V safe). From the board's TX. | ||
| VIN | 3.3 V, 5 V | ||
| RTS | digitalReady to send, out of the module. | ||
| GND | ground | ||
| DFU | digitalFirmware-update mode. Leave unconnected. |
Size and material
- Size
- 21 × 5 × 32 mm
- Weight
- 3.4 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.