HC-05 Bluetooth classic serial module (with button)
Lets an Android phone or laptop talk to the project over Bluetooth like a wireless cable.
CSR BC417 Bluetooth 2.0 SPP module on a breakout: a wireless serial port to an Android phone or PC (not iPhone). Master or slave via AT commands (button enters AT mode). 3.6-6 V supply; default 9600 baud, PIN 1234. Its RXD pin is 3.3 V logic: from a 5 V board, feed it through a 1k/2k divider.
Electrical
- Supply voltage
- 3.6 to 6 V
- Talks over
- uart
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| EN | digitalKey / AT-mode enable. | ||
| VCC | 5 V3.6-6 V. | ||
| GND | ground | ||
| TXD | serial TX3.3 V output, to the board's RX. | ||
| RXD | serial RX3.3 V input. Divide a 5 V board's TX down (1k/2k). | ||
| STATE | digitalHIGH when connected. |
Size and material
- Size
- 28 × 3 × 15 mm
- Weight
- 9.07 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.