BMP280 pressure + altitude sensor
Measures air pressure, which tells altitude and hints at changing weather.
Bosch BMP280 barometric pressure (±1 hPa) and temperature (±1 °C) on an Adafruit STEMMA QT breakout. I2C at 0x77 (0x76 with SDO to GND) or SPI. 3.3-5 V.
Electrical
- Supply voltage
- 3.3 to 5 V
- Logic level
- 3.3 V
- Talks over
- i2c, spi
- I2C address
- 0x77, 0x76
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V | ||
| 3Vo | 3.3 V3.3 V regulator output. Leave unconnected normally. | ||
| GND | ground | ||
| SCK | I2C clock, SPI clockI2C SCL or SPI clock. | ||
| SDI | I2C data, SPI MOSII2C SDA or SPI data in. | ||
| SDO | SPI MISO, digitalSPI data out; in I2C mode selects the address. | ||
| CS | SPI selectSPI chip select. Leave unconnected for I2C. |
Size and material
- Size
- 25 × 5 × 18 mm
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.