BNO085 9-DoF orientation IMU (sensor fusion)
A smart motion sensor that tracks orientation precisely for robots and wearables.
CEVA/Hillcrest BNO085 with on-chip fusion: rotation vector, game rotation, step counter, stability classifier. I2C at 0x4A (0x4B), also UART/SPI. 3.3-5 V.
Electrical
- Supply voltage
- 3.3 to 5 V
- Logic level
- 3.3 V
- Talks over
- i2c
- I2C address
- 0x4A, 0x4B
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V3-5 V. Use the board's logic voltage. | ||
| 3Vo | 3.3 V3.3 V regulator output. Leave unconnected normally. | ||
| GND | ground | ||
| SCL | I2C clock | ||
| SDA | I2C data | ||
| INT | digitalData-ready interrupt. | ||
| RST | digitalReset, active LOW. |
Size and material
- Size
- 26 × 5 × 23 mm
- Weight
- 2.5 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.