A2212 1000 KV brushless motor + 30 A ESC + propeller
A powerful motor and speed controller for things that fly or go fast on water.
Outrunner brushless motor (1000 KV, 2-3S LiPo) with a matched 30 A speed controller and 10x4.5" props. The ESC takes a servo-style 1-2 ms signal and has a 5 V BEC output that can power a receiver or board. Draws up to 30 A. Spinning props cut.
- Draws high current. Designs using it get a safety review before we build them.
- Has a blade or sharp edge. Designs using it get a safety review before we build them.
Electrical
- Supply voltage
- 6 to 12.6 V
- Current
- 10000 mA typical, 30000 mA max
- Talks over
- pwm
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| BAT+ | power inRed XT60/bullet lead from the LiPo. | ||
| BAT- | ground | ||
| SIG | PWMServo lead signal: 50 Hz, 1-2 ms. Arm at 1 ms. | ||
| BEC+ | 5 V5 V out from the ESC (about 2 A). Do not also feed 5 V in. | ||
| BEC- | ground |
Size and material
- Size
- 28 × 30 × 28 mm
- Material
- metal
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.