MPM3610 3.3 V buck converter breakout (21 V in, 1.2 A)
Makes 3.3 V from a battery or 12 V supply efficiently, without getting hot.
Integrated-inductor buck regulator on a TO-220-pin-compatible breakout: up to 21 V in, 3.3 V out at up to 1.2 A, 90-95 % efficient, EN pin to shut down. A drop-in, cool-running replacement for an LD1117-3.3.
Electrical
- Supply voltage
- 4.5 to 21 V
- Current
- 500 mA typical, 1200 mA max
- Talks over
- power
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | power in, battery | ||
| GND | ground | ||
| VOUT | not connected3.3 V out, 1.2 A max. | ||
| EN | digitalTie LOW to shut down. |
Size and material
- Size
- 17 × 3 × 10 mm
- Weight
- 0.5 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.