DFPlayer Mini MP3 player with 3 W amp (microSD)
A tiny music player that reads a memory card and drives a small speaker.
Plays MP3/WAV from a microSD card with a built-in 3 W mono amp for a small speaker. Controlled over 9600-baud UART or buttons/ADC keys. 3.2-5 V. 20 x 20 mm.
Electrical
- Supply voltage
- 3.2 to 5 V
- Talks over
- uart
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VCC | 3.3 V, 5 V | ||
| GND | ground | ||
| RX | serial RXAdd 1 kΩ in series from the board's TX (needed on 5 V boards). | ||
| TX | serial TX | ||
| BUSY | digitalLOW while playing. | ||
| SPK_1 | not connectedSpeaker + (3 W, 4-8 Ω). | ||
| SPK_2 | not connectedSpeaker -. Not ground. | ||
| DAC_R | not connectedLine out right. | ||
| DAC_L | not connectedLine out left. |
Size and material
- Size
- 20 × 8 × 20 mm
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.