DotStar APA102 addressable LED strip, 60 LEDs/m (black)
A strip of color lights that stays smooth on camera and is easy for any board to drive.
Addressable RGB strip with separate clock and data (no strict timing, high PWM rate, so it suits camera work and POV). 60 LEDs/m, 16.65 mm pitch, ~60 mA per LED at full white. 12.7 mm wide (14 mm in its weatherproof sleeve). 5 V.
Electrical
- Supply voltage
- 4.5 to 5.5 V
- Current
- 1000 mA typical, 3600 mA max
- Talks over
- spi
Needs alongside it
- About 3.6 A per metre at full white: separate 5 V supply, grounds joined.
- Use a 74AHCT125 on CI/DI from a 3.3 V board for long or fast runs.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 5V | 5 V | ||
| CI | SPI clockClock in. | ||
| DI | SPI MOSIData in. | ||
| GND | ground |
Size and material
- Size
- 1 × 0 × 0 m
- Material
- led
- Sold by the
- m
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.