DRV8833 dual motor driver
A tiny driver that runs two small motors forwards and backwards from your board.
TI dual H-bridge for small motors: 1.2 A per channel (2 A peak), motor supply 2.7-10.8 V, 3.3 V or 5 V logic. Speed by PWM on the IN pins. Ideal for TT motors on 4xAA or a 2S LiPo. Adafruit breakout.
Electrical
- Supply voltage
- 2.7 to 10.8 V
- Current
- 2 mA typical, 2000 mA max
- Talks over
- digital, pwm
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VM | power inMotor supply, 2.7-10.8 V. | ||
| GND | ground | ||
| AIN1 | PWM, digital | ||
| AIN2 | PWM, digital | ||
| BIN1 | PWM, digital | ||
| BIN2 | PWM, digital | ||
| SLP | digitalSleep. Pulled HIGH (awake) on the board. | ||
| FLT | digitalFault output, LOW on over-current or over-temperature. | ||
| AOUT1 | not connectedMotor A. | ||
| AOUT2 | not connectedMotor A. | ||
| BOUT1 | not connectedMotor B. | ||
| BOUT2 | not connectedMotor B. |
Size and material
- Size
- 26 × 3 × 18 mm
- Weight
- 1.5 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.