DRV8871 DC motor driver breakout, 3.6 A
A sturdy driver for one 12-24 V motor that limits its own current.
Adafruit single H-bridge for one brushed DC motor: 6.5-45 V motor supply, 3.6 A peak with built-in current limiting (set by resistor), 3.3 V or 5 V logic. Two inputs (IN1/IN2) give forward, reverse, brake and coast, with PWM on either.
Electrical
- Supply voltage
- 6.5 to 45 V
- Talks over
- digital, pwm
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| POWER+ | power inMotor supply 6.5-45 V (terminal block). | ||
| POWER- | groundMotor supply ground (terminal block). | ||
| GND | groundLogic ground. | ||
| IN1 | PWM, digital | ||
| IN2 | PWM, digital | ||
| MOTOR+ | not connectedOUT terminal block. | ||
| MOTOR- | not connectedOUT terminal block. |
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.