DS18B20 waterproof temperature probe
A waterproof thermometer on a cable. Good for pools, aquariums, soil and fridges.
Maxim DS18B20 sealed in a 6 x 30 mm stainless tube on a 91 cm cable. -55 to 125 °C, ±0.5 °C from -10 to 85 °C, 9-12 bit. Dallas 1-Wire: many probes can share one pin. 3-5.5 V. Comes with the 4.7 kΩ pull-up.
Electrical
- Supply voltage
- 3 to 5.5 V
- Current
- 1 mA typical, 1.5 mA max
- Talks over
- onewire
Needs alongside it
- 4.7 kΩ from DATA to VDD (included with the probe).
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VDD | 3.3 V, 5 VRed wire. | ||
| DATA | 1-Wire, digitalYellow or white wire. 4.7 kΩ to VDD. | ||
| GND | groundBlack or blue wire. |
Size and material
- Size
- 6 × 6 × 30 mm
- Material
- metal
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.