Tri-color e-paper breakout 2.13", 250x122 (SSD1680Z)
A paper-like screen in black, white and red that uses no power to keep showing.
Red/black/white e-paper on an Adafruit breakout with SRAM frame buffer, microSD, 3.3 V regulator (ENA pin) and 3-5 V logic. SPI. Keeps its image with the power off; tri-color refresh takes about 15 s.
Electrical
- Supply voltage
- 3 to 5.5 V
- Talks over
- spi, digital
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| Vin | 3.3 V, 5 V | ||
| 3.3V | 3.3 VRegulator output. | ||
| GND | ground | ||
| ENA | digitalPull LOW to switch off the regulator (display, SRAM, SD). | ||
| SCK | SPI clock | ||
| MISO | SPI MISO | ||
| MOSI | SPI MOSI | ||
| ECS | SPI selectE-ink chip select. | ||
| D/C | digital | ||
| SRCS | SPI selectSRAM chip select. | ||
| SDCS | SPI selectmicroSD chip select. | ||
| RST | digital | ||
| BUSY | digital |
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.