Flex sensor, 4.5" (bend sensor)
A strip that senses how much it's bent, for gloves and joints.
Resistive strip about 10 kΩ flat, rising as it bends (roughly 20 kΩ at 90°). Glove fingers, hinges and bend detection. 112.5 mm long. Read as a divider.
Electrical
- Supply voltage
- 0 to 5.5 V
- Talks over
- analog
Needs alongside it
- Needs a fixed resistor to form a voltage divider.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 1 | 3.3 V, 5 V | ||
| 2 | analogWith a fixed resistor (about 10-47 kΩ) to GND. |
Size and material
- Size
- 6 × 1 × 113 mm
- Weight
- 0.5 g
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.