Water flow sensor, 1/2" (YF-S201 type)
Counts how much water flows through a pipe, like a small water meter.
Hall-effect turbine in a 1/2" threaded body. 1-30 L/min, frequency (Hz) = 7.5 x flow (L/min). 5-18 V, 15 mA at 5 V. Pulse output swings to the supply voltage, so it needs shifting for 3.3 V boards. Rated to 2.0 MPa.
Electrical
- Supply voltage
- 5 to 18 V
- Logic level
- 5 V
- Current
- 15 mA typical, 15 mA max
- Talks over
- digital
Needs alongside it
- Pulses swing to 5 V. Use a divider or level shifter on 3.3 V boards.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VCC | 5 V, power inRed wire. | ||
| PULSE | digitalYellow wire. Count rising edges. | ||
| GND | groundBlack wire. |
Size and material
- Size
- 64 × 36 × 36 mm
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.