Force-sensitive resistor, round 0.5" (0.3-10 N)
A thin pad that senses how hard it's pressed, like a sit sensor on a seat.
Alpha MF01A-N-221-A01 FSR: resistance drops from over 20 MΩ unloaded as it is pressed, 0.3-10 N (30 g-1 kg). Repeatability about 10 %, so good for presence and squeeze, not precise weight. Read as a divider with 10 kΩ.
Electrical
- Supply voltage
- 0 to 5.5 V
- Talks over
- analog
Needs alongside it
- Needs a 10 kΩ resistor from the analog pin to GND (divider).
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 1 | 3.3 V, 5 VEither tab, to the supply. | ||
| 2 | analogTo an analog pin, with 10 kΩ to GND. |
Size and material
- Size
- 18 × 1 × 60 mm
- Weight
- 0.9 g
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.