Skip to content

37D metal gearmotor 30:1 12V with 64 CPR encoder (Pololu)

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A heavy-duty geared motor with feedback for carts, lifts and bigger moving builds.

37 mm diameter Pololu gearmotor with helical pinion and a 64 CPR quadrature encoder (1920 counts per output turn; encoder needs 3.5-20 V). 330 rpm no-load and 14 kg·cm stall at 12 V; 0.2 A no-load, 5.5 A stall. 37 mm x 68 mm, 6 mm D-shaft, 200 g. For carts, lifts and heavier robots.

Electrical

Supply voltage
6 to 12 V
Logic level
5 V
Current
200 mA typical, 5500 mA max
Talks over
digital

Needs alongside it

  • Encoder outputs swing to its 5 V supply: divide or shift them on 3.3 V boards.
  • Needs a driver good for 5.5 A stall at 12 V (VNH5019 or a Pololu G2).
  • Power from a supply rated for 5.5 A per motor at 12 V, not the board's 5 V pin. Join the grounds.

Pins

PinCan doMax VMax mA
M+not connectedRed motor lead.
M-not connectedBlack motor lead.
ENC_VCC5 VBlue lead. Encoder supply 3.5-20 V: use 5 V.
ENC_GNDgroundGreen lead.
ENC_AdigitalYellow lead. Swings 0 to ENC_VCC.
ENC_BdigitalWhite lead. Swings 0 to ENC_VCC.

Size and material

Size
37 × 68 × 37 mm
Weight
200 g
Material
metal
Sold by the
piece

Works with

Projects using it

No public project uses it yet. Design one that does.