Micro metal gearmotor 15:1 LP 6V with 12 CPR encoder (Pololu)
A small geared motor that also reports how far it has turned, for robots that drive precise distances.
Low-power Pololu micro metal gearmotor with a magnetic quadrature encoder on the back (12 counts per motor revolution, about 183 per output turn). 860 rpm no-load, 0.17 kg·cm stall at 6 V; 40 mA no-load, 0.36 A stall. 10 x 12 x 32 mm, 11 g. Encoder outputs swing to its VCC, so power it from the board's logic voltage.
Electrical
- Supply voltage
- 3 to 9 V
- Current
- 40 mA typical, 360 mA max
- Talks over
- digital
Needs alongside it
- Use a motor driver (DRV8833, TB6612FNG, MAX14870) or a MOSFET; a GPIO can't supply the current.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| M1 | not connectedMotor terminal. | ||
| M2 | not connectedMotor terminal. Swap with M1 to reverse. | ||
| VCC | 3.3 V, 5 VEncoder supply. Use the board's logic voltage so A/B match it. | ||
| GND | groundEncoder ground. | ||
| OUTA | digitalEncoder channel A. | ||
| OUTB | digitalEncoder channel B (90° from A). |
Size and material
- Size
- 10 × 12 × 32 mm
- Weight
- 11 g
- Material
- metal
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.