Mini GPS PA1010D (I2C or UART)
A tiny GPS that tells the project where it is, over the same two wires as other sensors.
25 mm square GNSS module (MTK3333) with built-in antenna: 33 tracking channels, -165 dBm, up to 10 Hz. Talks I2C (address 0x10) or UART at 9600 baud. 3-5 V in, ~30 mA. No external-antenna option.
Electrical
- Supply voltage
- 3 to 5.5 V
- Current
- 30 mA typical, 30 mA max
- Talks over
- i2c, uart
- I2C address
- 0x10
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V | ||
| GND | ground | ||
| 3Vo | 3.3 VClean 3.3 V out. Leave unconnected normally. | ||
| SCL | I2C clock | ||
| SDA | I2C data | ||
| TXO | serial TXNMEA out at 9600 baud, 3.3 V logic. | ||
| RXI | serial RXCommands in, 3-5 V safe. | ||
| PPS | digitalPulse per second once fixed. | ||
| WAKE | digitalStandby wake-up. | ||
| RST | digitalPull LOW to reset. |
Size and material
- Size
- 26 × 8 × 25 mm
- Weight
- 5 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.