Ultimate GPS breakout (PA1616S, 10 Hz)
Knows where it is on Earth and the exact time, from satellites.
MTK3339-based GPS, 66 channels, -165 dBm tracking, 1-10 Hz updates, built-in antenna plus u.FL for an external one. NMEA over UART at 9600 baud, 3.3 V output, 5 V-safe input. 3-5.5 V, 20-25 mA. Coin-cell backup holder.
Electrical
- Supply voltage
- 3 to 5.5 V
- Current
- 20 mA typical, 25 mA max
- Talks over
- uart
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V | ||
| GND | ground | ||
| TX | serial TXGPS data out (3.3 V). To the board's RX. | ||
| RX | serial RXCommands in (5 V safe). From the board's TX. | ||
| PPS | digitalOne pulse per second once it has a fix. | ||
| FIX | digitalBlinks while searching, steady once fixed. | ||
| EN | digitalPull LOW to turn the GPS off. | ||
| VBAT | not connectedBackup battery input. Leave unconnected if the coin cell is fitted. | ||
| 3.3V | 3.3 VRegulator output, up to 100 mA. Leave unconnected normally. |
Size and material
- Size
- 26 × 7 × 35 mm
- Weight
- 8.5 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.