Seeed Grove Vision AI Module V2 (Himax WiseEye2)
A little AI vision brain that spots objects and tells the main board what it saw.
Stand-alone vision AI board: Arm Cortex-M55 + Ethos-U55 NPU (Himax HX6538) runs detection and classification models from SenseCraft AI, then reports results to any board over I2C (Grove) or UART. Has a CSI connector for an OV5647 camera (sold separately). 3.3-5 V on the Grove port.
Electrical
- Supply voltage
- 3.3 to 5 V
- Current
- 80 mA typical, 200 mA max
- Talks over
- i2c, uart
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VCC | 3.3 V, 5 VGrove red. | ||
| GND | groundGrove black. | ||
| SDA | I2C dataGrove white. | ||
| SCL | I2C clockGrove yellow. | ||
| TX | serial TXHeader UART TX (alternative to I2C). | ||
| RX | serial RXHeader UART RX. |
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.