Hall effect sensor US5881 (unipolar, open drain)
Notices when a magnet comes close, for counting wheel turns or detecting a lid.
Melexis US5881 TO-92 latch-free unipolar hall switch: output pulls LOW when the south pole of a magnet is near. 3.5-24 V. Pin 1 power, 2 ground, 3 output (needs a 10 kΩ pull-up).
Electrical
- Supply voltage
- 3.5 to 24 V
- Talks over
- digital
Needs alongside it
- 10 kΩ from OUT to VDD (or INPUT_PULLUP).
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VDD | 3.3 V, 5 VPin 1. | ||
| GND | groundPin 2. | ||
| OUT | digitalPin 3, open drain: LOW near a south pole. |
Size and material
- Size
- 4 × 3 × 2 mm
- Weight
- 0.1 g
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.