TCA9548A 8-channel I2C multiplexer
Lets several identical sensors share one board without their addresses clashing.
Lets one board talk to up to 8 devices that share the same I2C address (e.g. several OLEDs or ToF sensors): select a channel, then talk normally. Itself at 0x70 (0x70-0x77 with A0-A2). 3-5 V; each downstream bus needs its own pull-ups.
Electrical
- Supply voltage
- 3 to 5.5 V
- Talks over
- i2c
- I2C address
- 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| Vin | 3.3 V, 5 V | ||
| GND | ground | ||
| SCL | I2C clockTo the board's I2C bus. | ||
| SDA | I2C dataTo the board's I2C bus. | ||
| RST | digitalPulled high. Pull LOW to reset. | ||
| A0 | digitalAddress +1 when HIGH. | ||
| A1 | digitalAddress +2 when HIGH. | ||
| A2 | digitalAddress +4 when HIGH. | ||
| SD0 | not connectedChannel 0 SDA (downstream device). | ||
| SC0 | not connectedChannel 0 SCL (downstream device). | ||
| SD1 | not connectedChannel 1 SDA (downstream device). | ||
| SC1 | not connectedChannel 1 SCL (downstream device). | ||
| SD2 | not connectedChannel 2 SDA (downstream device). | ||
| SC2 | not connectedChannel 2 SCL (downstream device). | ||
| SD3 | not connectedChannel 3 SDA (downstream device). | ||
| SC3 | not connectedChannel 3 SCL (downstream device). | ||
| SD4 | not connectedChannel 4 SDA (downstream device). | ||
| SC4 | not connectedChannel 4 SCL (downstream device). | ||
| SD5 | not connectedChannel 5 SDA (downstream device). | ||
| SC5 | not connectedChannel 5 SCL (downstream device). | ||
| SD6 | not connectedChannel 6 SDA (downstream device). | ||
| SC6 | not connectedChannel 6 SCL (downstream device). | ||
| SD7 | not connectedChannel 7 SDA (downstream device). | ||
| SC7 | not connectedChannel 7 SCL (downstream device). |
Size and material
- Size
- 31 × 3 × 18 mm
- Weight
- 1.8 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.