INA228 power monitor (85 V, 20-bit)
A very precise power meter for batteries, solar panels and higher-voltage systems.
TI INA228 with a 15 mΩ shunt: bus voltage up to 85 V, 20-bit ADC, energy and charge accumulation, high- or low-side. I2C 0x40-0x4F. 3.5 mm terminal block. Logic 3-5 V.
Electrical
- Supply voltage
- 2.7 to 5.5 V
- Talks over
- i2c
- I2C address
- 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V | ||
| GND | ground | ||
| SCL | I2C clock | ||
| SDA | I2C data | ||
| VIN+ | not connectedShunt + (current in). | ||
| VIN- | not connectedShunt - (current out). | ||
| VBUS | not connectedBus voltage sense, up to 85 V. |
Size and material
- Size
- 26 × 10 × 20 mm
- Weight
- 3.3 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.