IR LED 5 mm, 940 nm (super-bright)
An invisible light that sends remote-control signals to TVs and gadgets.
Infrared emitter for sending TV-remote codes or night-vision lighting. About 1.6 V forward. Rated 100 mA continuous / 1 A pulsed, so drive it through a transistor for range; straight from a GPIO keep it to 20 mA with a resistor.
Electrical
- Supply voltage
- 1.2 to 1.6 V
- Current
- 20 mA typical, 20 mA max
- Talks over
- digital, pwm
Needs alongside it
- About 82 Ω from 3.3 V or 180 Ω from 5 V for 20 mA. Use a 2N2222 / MOSFET for 100 mA.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| anode | digital, PWMLong leg (+). | ||
| cathode | groundShort leg (-). |
Size and material
- Size
- 5 × 9 × 5 mm
- Weight
- 0.3 g
- Material
- led
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.