IR remote receiver, 38 kHz (TSOP38238)
Lets a TV remote control the project.
Vishay demodulating IR receiver for 38 kHz / 940 nm TV-remote signals. Output idles HIGH and pulses LOW with the decoded remote code. 2.5-5.5 V, about 0.35 mA. Pin 1 OUT, pin 2 GND, pin 3 VS (left to right, facing the dome).
Electrical
- Supply voltage
- 2.5 to 5.5 V
- Current
- 0.35 mA typical, 0.45 mA max
- Talks over
- digital
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| OUT | digitalPin 1. Active LOW, same voltage as VS. | ||
| GND | groundPin 2. | ||
| VS | 3.3 V, 5 VPin 3. Use the board's logic voltage. |
Size and material
- Size
- 7 × 8 × 5 mm
- Weight
- 0.43 g
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.