Analog thumb joystick with select button
A little game-controller stick for steering or moving a cursor.
PSP-style 2-axis thumbstick on a breakout: two 10 kΩ pots (X, Y) plus a push switch. Any supply up to 5 V, about 1 mA at 5 V.
Electrical
- Supply voltage
- 2 to 5 V
- Current
- 1 mA typical, 1 mA max
- Talks over
- analog, digital
Needs alongside it
- The select button needs INPUT_PULLUP.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VCC | 3.3 V, 5 V | ||
| Xout | analog | ||
| Yout | analog | ||
| Sel | digitalPressing the stick pulls this to GND. Needs INPUT_PULLUP. | ||
| GND | ground |
Size and material
- Size
- 38 × 32 × 38 mm
- Weight
- 12 g
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.