5 mm LEDs, assorted colors (white, blue, green, yellow, red)
Little lights in five colors for status and decoration. Each needs a resistor.
Diffused 5 mm LEDs, 5 of each color. Red, yellow and green drop about 2 V; blue and white about 3.3 V at 20 mA, so on a 3.3 V board blue and white need a small resistor (about 10-47 Ω) or a 5 V supply via a transistor.
Electrical
- Supply voltage
- 1.8 to 3.4 V
- Current
- 15 mA typical, 20 mA max
- Talks over
- digital, pwm
Needs alongside it
- Size it for the color: (supply - forward voltage) / 0.015 A.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| anode | digital, PWMLong leg (+). | ||
| cathode | groundShort leg (-). |
Size and material
- Size
- 6 × 9 × 6 mm
- Material
- led
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
