4-digit 7-segment display 0.56" with I2C backpack (HT16K33), red
Bright four-digit numbers for clocks, timers and counters, needing only two data wires.
Assembled clock-style 4-digit display with colon on an HT16K33 backpack with STEMMA QT. I2C at 0x70 (0x70-0x77 by jumpers, so up to 8 share a bus). 3.3-5 V. Backpack 50 x 26.7 mm.
Electrical
- Supply voltage
- 3.3 to 5.5 V
- Talks over
- i2c
- I2C address
- 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VCC | 3.3 V, 5 V | ||
| GND | ground | ||
| SDA | I2C data | ||
| SCL | I2C clock |
Size and material
- Size
- 50 × 14 × 27 mm
- Weight
- 14.5 g
- Material
- led
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.