Constant-current LED boost driver (TPS61169)
Feeds LEDs exactly the current they need, so bright LEDs last and don't flicker.
Drives LEDs (strings of high-power or filament LEDs) at a set constant current: 25 mA by default, 100/200/250 mA by jumper, up to 40 V or 400 mA (not both). 3-5 V input, PWM dimming pin.
Electrical
- Supply voltage
- 3 to 5.5 V
- Talks over
- pwm
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| Vin | 3.3 V, 5 V | ||
| G | ground | ||
| PWM | PWMDimming / enable input. | ||
| L+ | not connectedConstant-current output to the LED anode. | ||
| LED- | not connectedLED cathode return. |
Size and material
- Size
- 25 × 10 × 19 mm
- Weight
- 3.8 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.